Switching Operating Modes - Mitsubishi Electric MJ-E26SX-A1 Instruction Manual

Switching operating modes

You can choose between seven operating modes.
Easy Dehumidifying &
Laundry modes
Changes with every press
Press
¡Selected mode
lamp lights
When you want to dehumidify easily (without the hassles of setting humidity levels)
¡Easy Dehumidifying
60
50
0
Room temperature (°C)
When you want to dry clothes quickly
(without the hassles of calculating humidity levels and timer settings for the amount of laundry)
¡Laundry
∞ Empty the water tank before operating the unit. The unit may stop before the clothes are dry due to a full tank.
∞ Do not use in conjunction with OFF Timer mode. The unit may stop before the clothes are dry.
∞ The following conditions prevent clothes from drying well:
Room temperature below 15°C, large volume of laundry; laundry not spaced well; clothes of thick fabric
and spacious room.
∞ When the room temperature is below 5°C, less water evaporates from the clothes, decreasing the
amount of temperature change. Therefore the unit is unable to detect the state of the laundry and
may turn off after 1 hour.
∞ Restart the unit if it turns off before the laundry dries (except when the temperature is below 5°C).
∞ Pressing HUMIDITY SELECTION while in Easy Dehumidifying or LAUNDRY modes changes the
Information
mode to AUTO.
10
High, Low, Mildew Guard, Low
Temp and Auto modes
Changes with every press
Press
¡Frame appears
around selected mode
Even if Automatic mode is not
selected using MODE, it can be
activated by pressing
HUMIDITY SELECTION.
20 27 30
The unit operates for 12 hours and automatically swiches off.
2
2
The unit automatically controls airflow to counter
excessive room temperature/humidity. It activates the
blower at high temperatures.
¡Room temperature is below 27°C - the unit automatically
sets the humidity level according to the temperature.
¡Room temperature is above 27°C - the unit lowers the
humidity level to 50%, then activates the blower.
The dehumidifier is reactivated when humidity rises to 60%.
Reading the humidity display
CURRENT indicates the
current humidity.
Current humidity range is
between 30-80%.
• Humidity levels below 30%
are displayed as 30%.
• Humidity levels above 80%
are displayed as 80%.
SELECTION indicates set
humidity level
(Automatic mode only).
2