Table of Contents
Advertisement
Details/Background
Display ranges
Testo Comfort software has all the functions needed to control
and configure Testo measuring instruments, to transmit data to
your PC and to edit it. This Chapter describes all the commands
necessary.
Testo Comfort-Software is divided into two main parts: the
archive and the work area.
Archive
Your measuring instruments and measurement data are
managed in this area.
All of the measuring instruments are inactive when the program
starts. If you want to activate a measuring instrument, which is
connected, click twice on the symbol for the measuring
instrument. Connection to the measuring instrument is set up
and the symbol for the instrument changes.
Alternatively, you can click on the symbol for the instrument with
the right mouse button and you will then receive a menu from
which to select. Select "Open", to activate the required
measuring instrument. The measuring instrument has to be
connected and switched to the correct port.
Locations and directories can be set up in the archive; familiar to
you from Windows Explorer®. You can set up, copy, delete etc.
sub-directories by clicking the right mouse button on a directory
or a location.
If there are saved measurements in the measuring instrument and
these are shown below the measuring instrument, you can drag
and drop the data from the measuring instrument to a folder in
the archive. You can highlight several items by keeping the
Control button pressed.
You can also copy the data (from the measuring instrument or
archive) into the work area for display purposes. Mark the
required data with the mouse and drag it into the work area.
59
Advertisement
Table of Contents
