Foreword Dear Customer You have made the right decision by choosing a measuring instrument from Testo. Every year, thousands of customers purchase our high-quality products. There are many good reasons for this. 1) We offer value for money. Reliable quality at the right price.
Open the battery compartment at the back of the instrument. Put in block battery. Observe polarisation. Close battery compartment. Refer to “Power supply” Chapter for more information on alternative power supply, charge, battery quality, charging procedure. Observe instrument configuration when using rechargeable batteries. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
Some things can only be set via PC software (See Ordering data): Location name (8 characters) Log head (24 characters), e.g. your company name - is also printed when readings are printed. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
(NTC) and velocity location (ball) RS232: PC connection Arrow buttons 12V: Mains connection move the cursor testo 645 Hold Max Min Socket 1: Mean – Temperature probes (T/C type K/J/S or NTC) Socket 2: – Combined probe for humidity...
Shows capacity of battery and rechargeable battery. If the inner segment no longer appears (symbol flashes), the battery has to be changed or the rechargeable battery has to be recharged. The instrument switches itself off automatically after 1 minute. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
Start and end Calculate mean Reset mean Parameter settings Selected The setting functions are activated in accordance with the reading testo testo parameter selected - flashing cursor in display (See 1.): °C System adjustment with EEPROM probe (4.1) Reset - system adjustment Humidity probe (0636.9740 and 0636.9715)/...
Page 9
Print parameters AUTO Unit selection Program automatic saving • Select meas. °C°F cycles • Set m/sfpm [ft/min] (testo 445) measurement rate /min cfm [ft /min](testo 445) mbar Read memory in W [”H O] (testo 445) contents on display with...
A distance 0f 0.5 m should not be exceeded in order to depending on probe(s) guarantee problem-free data transfer. Objects between connected. instrument and printer prevent the data from being transferred. Please observe notes in the instruction manual on the printer. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
34. 8 0 Hold Max/Min Mean Minimum readings since the M.05 N.0017 measurement began 1MIN Save measured 56. 6 2 value Print measured value 1MIN 20. 0 0 Hold Max/Min Mean See multi-point/timed mean calculation Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
MEAN page 13) • Select parameter required. New mean calculation possible Update values. Calculate mean M.05 N.0017 MEAN 25. 2 1 Mean ME AN NE W Number of updated values • Save mean Print mean Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
55. 2 0 calculate mean. MEAN 00: 1 5 New mean calculation possible Mean M.05 N.0017 Timed duration of MEAN mean calculation 55. 2 1 MEAN NEW 00: 0 5 Save mean. Location Print mean. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
The cross-section Use ESC to go Location can only be called up if to selection of volume flow is activated cross-section entry (testo 445 instrument) Ø AxB, m2, Funnel) Increase value 50. 0 Decrease value Select digit box Return to current...
- flashing cursor in display. M.05 N.0017 System adjustment (only possible in testo 645): testo 645 and probes with EEPROM (Part no. 0614.xxxx) can °C be adjusted to the “zero error adjustment point”. The probe 69. 6 characteristic saved in the measuring instrument is offset at a measurement point.
N.0017 Displaying calculated humidity parameters. If Testo`s combination humidity probe (e.g. 0636.9740) is td°C connected, testo 445 and testo 645 display a calculated humidity parameter in addition to temperature and relative humidity. You 12.9 can select from the following parameters: td°C...
Initializing pressure probe / Activating velocity and volume flow The setting functions are activated in accordance with reading line selected - flashing cursor in display. M.05 N.0017 Differential pressure probe (testo 445 only): /h, in addition to mbar; Activating/deactivating m/s, m mbar initialisation 22.
The symbol corresponding to the selection appears in the top line. 21. 8 0 The function is activated with Location Parameter settings (See Chapter 4). AUTO CLEAR CLEAR AUTO AUTO OU T MEMORY MEMORY MEMORY MEMORY Location Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
01: 3 series is accepted. M.05 N.0017 AUTO Cancel saving procedure. Location M.06 N.0001 m3/h Starts automatic saving again. An additional measurement series is 19665 AUTO added. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
The N.0x counter flashes in the display. Location Select the measurement cycle by pressing activates a printout of the selected measurement cycle. M.05 N.0017 °C 79. 7 button enables you to go back one step. Location Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
If the mains unit is connected and the charging procedure is confirmed: Risk of explosion!!!! - Battery operation is set and rechargeable battery is put in: Rechargeable battery will not be charged. See page 24 Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
Correct battery recharging in the instrument via the mains unit can only be guaranteed if the above mentioned Testo rechargeable batteries are used. If other rechargeable battery types are used, recharging will have to be carried out by an external recharger.
The flashing position in the display can be set 1998 = scroll/ = next position - Setting the time TIME 11: 2 5 The blinking position in the display can be set = scroll/ = next position - Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
5. Pitot tube factor (testo 445) Pitot tube factor setting: The factor for Pitot tubes from Testo is constantly at 1.00 and Parameter does not need to be changed. If the Pitot tubes from other firms are used, ask your supplier for the Pitot tube factor and save in instrument.
7. Velocity measurement Volume flow funnel (testo 445) A volume flow funnel is needed to measure the volume flow in a ventilation opening (grid or outlet with dual wall clearance). The opening of the funnel must be covered completely by the grid (max.
The Pitot tube factor for testo Pitot tubes is at a constant 1.00 and does not need to be changed. If non-Testo Pitot tubes are used, please ask your supplier for the factor and save it.
Page 29
CO/CO2 measurement (testo 445) CO measurement (testo 445) The connected probe 0632.1247 is initialised during the switch- on phase (“Count Down” runs in the display). For this reason, the measuring instrument should only be switched on in an atmosphere free of CO. Values will be too low otherwise in subsequent measurements.
(testo 445) The 0632.1240 probe measures concentrations from 0 to 1 vol % CO 2 . The unit can be switched between ppm and vol% as described in “Parameter settings” on page 16. The measuring principle is based on infrared absorption. The probe has a relatively high power consumption on account of its sensor.
Elevation Air pressure Air pressure Air pressure Air pressure Elevation Elevation Elevation M.S.L (mbar) (mbar) (mbar) (mbar) M.S.L M.S.L M.S.L Table: Barometric elevation formula Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
Page 32
We therefore assume an absolute air pressure in the measurement medium of 1000 mbar. The table on page 31 is also saved in the Testo Comfort software. Absolute pressure can be calculated automatically using this software if the height above mean sea level, barometric pressure and differential pressure are entered.
Turn instrument on and off again If the error message returns, please contact your nearest Testo service point. Testo-Direct info@Testo-Direct.com 1.888.610.7664 www. .com...
Technical data - Instruments testo 645/445 testo 645/445 Type J (FeCu-Ni) General technical data Measuring range: -200 to +1000 °C Memory space: Up to 3000 readings ±0.3 °C or ±0.5 % of Accuracy* Power supply: Battery / rechargeable batt. reading at 22 °C:...
Page 35
Technical data - Instruments testo 645/445 testo 645 Pressure units can be switched: Temperature measurement mbar, psi; in W(”H Pt100 Calculated velocity values -200 to +800 °C measuring range: density compensated: 0 to 100 m/s Accuracy* ±0.2 °C or ±0.1 % of Calculated volume flow values: at 22 °C:...
System case, aluminium for instrument, probes and additional accessories. Clear layout of case contents by placing 0516 0410 probes in lid. Additional accessories 9 V rechargeable battery for testo 445, testo 645 measuring instruments 0515 0025 PT 100-probes Meas. range / Accuracy Connection cable Part no..
Page 37
Ordering data Fühler für testo 645 / 445 NiCr-Ni probes Meas. range / Accuracy Connection Part no. sec. Quick-action surface probe with sprung thermocouple strip -200...+300°C, Short- Plug-in head 0604 0194 term up to +500 °C, Please order connection cable 0430.0143)
Page 38
Ordering data Probes for testo 645 / 445 Humidity/temperature Measuring range System Connection Part no. probes accuracy* sec. cable Standard indoor air quality probe up to +70 °C 0 to 100 %RH, probe ±2 %rH (2 to 98 %rH) <12...
Page 39
Ordering data Probes for testo 645 / 445 Accessories for humidity/temperature probes, 3-function probe Diameter Part no. Caps for all humidity probes Metal protection cage, material: stainless steel V4A. Quick adjustment time, robust and tempera- 21 mm 0554 0665 12 mm 0554 0755 ture-proof.
Page 40
Ordering data Probes for testo 645 / 445 Velocity probes Sensor Meas. range Accuracy (System) Part no.. Vane/temperature probe, can be attached to 0,6 to 60 m/s ±(0,2 m/s +1 % of m.v.) 0635 9540 handle or telescope -30 to +140 °C...
Page 41
Ordering data Probes for testo 645 / 445 Additional probes Sensor Meas. range Accuracy Part no. 3-function probe for simultaneous measurement Hot bulb 0 to 10 m/s ±(0,03 m/s +5 % v.Mw.) 0635 1540 of Ttemperature, humidity and velocity. With plug-...