Table of Contents
Advertisement
44
Control unit
Online measurement
Online configuration
1. Click on testo 300 XXL: Control unit
Open the sub-menu via the right mouse button or
click on the "Instrument" main menu
2. Click on "Online Configuration". The window to set the
measuring cycle opens and the number of channels is shown.
3. Enter the required measuring cycle in sec, min, h
and confirm with "OK". The measuring cycle is saved.
4. Leave the menu by clicking on "Cancel" and the existing data
is retained.
Online measurement
1. Click on testo 300 XXL: Control unit
Open the sub-menu with the right mouse button or click on
the "Instrument" main menu
2. Click on "Online".
3. Online measurement is started via "Start". The measurement
data is displayed.
4. You can vary the type of display via the following symbols in
the menu bar:
Diagram
Table
Digit box
Histogram
5. Click on the "Instruments" menu, Online/stop if you wish to
end the measurement.
6. Use the following icons to save or print online measurement
data:
Save
or
Print.
Advertisement
Table of Contents
