Control unit
Settings register
Entering print text
Entering the address
1. Click on "+" in front of
"Miscellaneous". The sub-menus
appear.
2. Click on Print text. Three headers
(with 20 characters) and one footer
(with 20 characters) are available to
you for the text.
3. The text is saved and applied in the
control unit by clicking on "Apply".
4. Click on"OK" to save the data and to
close the instrument driver window.
1. Click on "+" in front of
"Miscellaneous". The sub-menus appear.
2. Click on Address.
3. Enter the text (Name,
Street, City etc.). The length of the
lines varies between 15 and 47
characters.
4. The text is saved and applied in the
control unit by clicking on "Apply".
5. Click on"OK" to save the data and to
close the instrument driver window.
41