Analysis Box Selecting Analysis Box - TESTO 300XXL Instruction Manual

Analysis box
Selecting analysis box
Note
Always connect interface cable to control unit.
activated if the control unit and analysis box are
1. Click on the testo 300 XXL instrument driver in the
archive (left mouse button). The instrument driver
is in colour.
2. Open the context menu on the instrument driver
using the right mouse button and click on "Open".
The "Instrument selection" window appears.
"Slave-Mode" appears on the testo 300 XXL
control unit display. It is not possible in this mode
to operate the control unit via keypad.
3. Select the analysis box and confirm with "Select".
The driver for the analysis box appears in archive.
The "Instrument selection" menu is only
connected
47