Table of Contents
Advertisement
46
Control unit
Barcode
Sub-directories, in which locations can be found, can be
accessed via the control unit. There are some restrictions when
making these sub-directories legible via barcodes:
An internal key and not the displayed location is coded in the
printed barcodes. The required locations have to be input in the
control unit beforehand in order to be able to use this key. If this
does not happen, the internal key is displayed in the control unit
instead of the location name.
The locations are suitable for barcodes regardless of how they
are produced:
Production type
Archive via "New location"
Comsoft instrument, "New location"
Instrument "New location"
Barcode
Cancelling the control unit
1. Open the sub-menu using the right mouse button.
2. Select "Close". "Slave Mode" on the
testo 300 XXL control unit display disappears and
the testo 300 XXL can again be operated via the
keypad.
Note
Configurations on the PC are saved in testo 300 XXL.
They can be configured at any time.
Suitable for barcode
No
Yes
Yes
If this location has
already been entered,
yes, otherwise no
Advertisement
Table of Contents
