Table of Contents
Advertisement
Step Installation
15. Step Installation
The steps are positioned so that the top of the step upright
is flush with the top of the deck extension. Weld the steps
to both the deck extension and the rear doorsill
(Figure 46).
1. Ensure that the steps are straight and square so they
do not affect the overall width of the vehicle or obstruct
the operation of the liftgate.
2. SAF-Holland requires that step braces be installed.
The braces must be secured to the step and to the
vehicle cross members (Figure 45).
Failure to maintain proper clearance
between steps and liftgate may interfere
with proper operation which, if not
avoided, could result in liftgate damage.
24
Figure 45
DECK EXTENSION
TYP
1/4"
STEP
XL-TG10149IM-en-US Rev A 12-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.
REAR SILL
VEHICLE
CROSS MEMBERS
1/4"
1/4"
4 X 4 X 1/4" TUBE
AT LEAST 4 CROSS
MEMBERS LONG
STEP BRACE
2 X 2 X 3/16"
TYP
BOTH ENDS
1/4"
TYP
Advertisement
Table of Contents
