Table of Contents
Advertisement
7.
Connect the black ground cable that is already
installed on the back of the pump box to a negative
terminal on the battery (Figure 37).
8.
Ensure the battery connections are as shown
(Figure 38).
NOTE: After tightening all electrical connections, apply a
dielectric grease to prevent corrosion.
Figure 38
POWER TO PUMP
XL-TG10149IM-en-US Rev A 12-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.
Auxiliary Battery & Cable Installation
Figure 37
_
+
BLACK 12"
GROUND CABLE
_
+
21
Advertisement
Table of Contents
