Table of Contents
Advertisement
6. Liftgate Installation
Position of Deck Extension
NOTE:
Do not work underneath the liftgate without
properly supporting the raised platform and
liftframe in accordance with workplace safety
requirements.
Failure to properly support the raised
platform and liftframe may result in the
liftgate collapsing which, if not avoided,
could result in death or serious injury.
1. Unfold the platform and flip over (Figure 12).
2. Attach two temporary 2"x2"x3/16"x38" angle brack-
ets to the deck extension with 18" of overhang. These
brackets will help maintain alignment (Figure 13).
3. Wrap a chain around the platform and attach the chain
to a hoist with adequate capacity. Attach a "C"-clamp
on both the road side and curb side of the platform to
ensure a chain does not slide out from under the plat-
form (Figure 14).
Failure to wrap the chain around the plat-
form may result in dropping the liftgate
which, if not avoided, could result in
death or serious injury.
XL-TG10149IM-en-US Rev A 12-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.
Figure 12
Figure 13
38" BOTH ANGLES
Figure 14
HOIST
CHAIN
"C"-CLAMP
2 PLACES
Liftgate Installation
PLATFORM
FLIP OVER
18" BOTH ANGLES
POSITION CHAIN
AROUND PLATFORM
11
Advertisement
Table of Contents
