Table of Contents
Advertisement
Liftgate Installation
4. Lift the platform with the hoist and place a floor jack
under the maintube (Figure 15).
5. Centre the platform on the vehicle and maintaining a
1/4" gap with a spacer between the deck extension
and the platform. Continue to support the platform.
6. The platform must be flush and parallel with the
deck extension maintaining a 1/4" gap between the
deck extension and the platform (Figure 16).
7. Ensure the liftagte is positioned correctly from the top
of the deck extension to the top of the main tube
across the full length.(Figure 17).
24"±½" for all models except where noted below
22"±½" for all TG35 models
21"±½" for all TG2536 low mounts
8. Use floor jacks to reposition the main tube parallel to
the vehicle deck both front to rear and left to right.
12
Figure 15
HOIST
FLOOR JACK
Figure 16
PLATFORM
Figure 17
24"±½" all models except
where noted below
22"±½" for all TG35
21"±½" for TG2536 low mount
XL-TG10149IM-en-US Rev A 12-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.
ANGLE BRACKET
1/4" GAP
DECK EXTENSION
DECK EXTENSION
ATTACHING PLATE
MAIN TUBE
Advertisement
Table of Contents
