Table of Contents
Advertisement
Side Mount & Battery Box
1.
Locate the pump box assembly on the curbside under
the vehicle on front of the sliding suspension but no
more than 20' from the back of the vehicle and 6" from
the curbside of the vehicle body (Figure 23).
2. Position the pump assembly brackets against the
trailer cross members and weld per Figure 24.
IMPORTANT: Ensure the lid can be removed.
XL-TG10149IM-en-US Rev A 12-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.
Pump Assembly Installation
Figure 23
Figure 24
PUMP BOX
MOUNTING
BRACKET
TYP
FULL
1/4"
LENGTH
20'
CROSSMEMBER
TYP
FULL LENGTH
1/4"
15
Advertisement
Table of Contents
