Table of Contents
Advertisement
PACSystems™ Industrial Displays User Manual
GFK-3138B
Section 5:
RXi-Panel PC and RXi2-LP IPC
The following Firmware Update requires the user to use a portable media storage device. Users can
deploy to either a DVD or a USB stick.
5.1
Deploy to DVD (Option 1)
1. Place a blank DVD in your optical drive.
2. Download the .iso file to your computer, and open File Explorer to the .iso file location
3. Right-click on the .iso file and select Burn disk image.
4. A prompt will appear requesting the user to select the disk burner. Select the disk burner
5. The optical drive will begin burning the DVD. Upon completion, the Windows Disk Image
6. Once the process is complete and the files are viewable, you may proceed with recovering the
5.2
Deploy to USB Stick (Option 2)
1. Insert a blank USB drive into your computer.
2. Download the .iso file to your computer and open your USB boot media creation tool.
3. Following the process with your chosen USB boot media creation tool.
Firmware Update Insutrctions for the RXi – Panel PC and RXi2 – LP IPC
Firmware Update Instructions for the
a. If your system does not have a DVD drive, connect an external DVD drive to the system
first.
b. Note: The optical drive must have support for DVD-burning to continue with this
process.
containing the blank DVD and select Burn.
a. If you only have one disk burner with the blank DVD inside, it will default to that
burner.
b. Optionally, select Verify disc after burning, but it is not required for this process
Burner will notify you that the process is complete and that the contents of the drive will be
viewable in File Explorer.
system.
a. This process may erase any data stored on the USB drive. If your selected USB drive
contains any important data, please be sure to create a backup of the files before
proceeding.
Section 5
Jul 2021
98
Advertisement
Table of Contents
