Operation - ADJ FOCUS SPOT ONE User Manual

Focus Spot One
Universal DMX Control: This function allows you to use a universal DMX-512 controller to control
the pan, tilt, gobos, colors, focusing, dimmer and strobe. A DMX controller allows you to create
unique programs tailored to your individual needs.
1. The Focus Spot One has 2 DMX channel modes; 15 channel mode and 17 channel mode. See
the 15-Channel Mode and 17-Channel Mode sections of this manual for detailed description of
the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures in the DMX Set Up section of
this manual as well as the set-up specifications that are included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions in the System Menu section to select your desired DMX channel mode
and to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows either single unit or several units linked together, to run
to the beat of the music.
1. Press the MENU button until "Sound State" is displayed, and press ENTER. Press the UP or
DOWN buttons so that "ON" is played and press ENTER.
2. Press the MENU button until "Sound Sense" is displayed, and press ENTER. Use the UP and
DOWN buttons to adjust the sound sensitivity. Press ENTER when you have found your desired
sensitivity level.
Show Mode: This mode allows either a single unit or several units linked together, to run one
of four shows that you choose.
1. Press the MENU button until "Show Mode" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to find your desired show, and press ENTER.
ADJ Products, LLC - www.adj.com - Focus Spot One User Manual Page 26

Operation