Dmx Operation; Beam Angle Adjustment - ADJ PAR ZP100 3K User Instructions

Par ZP100 3K
Universal DMX Control:
versal DMX-512 controller to control the dimmer, fine dimmer and
strobe. A DMX controller allows you to create unique programs tai-
lored to your individual needs.
1. The Par ZP100 3K has 4 DMX channel modes; 1 channel mode,
2 channel mode, 3 channel mode, 4 channel mode. See pages
16-17 for a detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are included
with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 9 to select your DMX channel
mode and set your desired DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
ADJ Products, LLC - www.adj.com - Par ZP100 3K Instruction Manual Page 14

DMX Operation

This function allows you to use a uni-
Par ZP100 3K
To adjust the beam angle slide the beam angle adjuster located
inside/in front of the lens. See diagram below.
The beam angle can be adjusted manually, between 9°/ 15°/ 20°/25°/ 30°.
ADJ Products, LLC - www.adj.com - Par ZP100 3K Instruction Manual Page 15

Beam Angle Adjustment