Chapter 4. Daily Use; First Use / Cleaning The Interior; Temperature Setting - Kernau KFCF 1003 EW User Manual

FIRST USE / CLEANING THE INTERIOR

Before using the appliance for the first time, wash the interior and all internal accessories with lukewram
water and some neutral soap to remove the typical smell of a brand new product, then dry thoroughly.
IMPORTANT:
Do not use detergents or abrasive powders, as these will damage the finish.

TEMPERATURE SETTING

• Min = minimum
• Normal = Normal
• Max = maximum
• Super = super freezing
• Set = setting
• Running = operation
• Off3's = Turning off for 3 seconds
Electrical connection
After connecting the device to power, all LED indicator lights will blink once. The appliance then returns
to the operating mode that was set before the power failure occurred.
Temperature setting
• Setting
Pressing the "SET" button causes the entry into the temperature setting mode. Each time you press, the
temperature indicator bar will move up the scale. The setting is made cyclically. The temperature can rise
from MIN on the scale to MAX on the scale. MAX on the scale indicates the lowest temperature. The
temperature is set automatically 5 seconds after the last button press.
• Super Freezing
Press the "SET" button repeatedly until the "SUPER" mode of freezing at MAX is entered on the scale,
the left-hand bar graph will then turn off and the "SUPER" indicator will light up. This mode is set
automatically 5 seconds after the last button press.
The compressor will run in "SUPER" freezing mode.
If the operation in the "SUPER" mode is maintained for 52 hours and it is not turned off manually during
this time, the system will automatically terminate the operation in this mode and return to operation with
the temperature on the scale 5.
Power On & Off
If the device is working, to turn it off, press the "ON / OFF" button for 3 seconds. If the device is not
working, to turn it on, press the "ON / OFF" button for 3 seconds.

CHAPTER 4. DAILY USE

EN 32