Installation And Lubrication; Parts And Maintenance - Ingersoll-Rand 2145QiMAX Series Product Information

EN
Models
† Pressure (L
2145QiMAX
2145QiMAX-A
2145QiMAX-AP
2145QiMAX-3
2145QiMAX-6
2155QiMAX
2155QiMAX-A
2145QiMAX-SP
2155QiMAX-SP
† K = 3dB measurement Uncertainty
pA
‡ K = 3dB measurement Uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized test stand-
ards. The exposure to the user in a specific tool application may vary from these results. Therefore, on
site measurements should be used to determine the hazard level in that specific application.

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 47132782 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
EN-2
Impacting Sound Level
dB(A)
(ISO15744)
) ‡ Power (L
p
96.3 107.3
96.3 107.3
96.3 107.3
96.3 107.3
96.3 107.3
96.3 107.3
WARNING
Free Speed Sound Level
dB(A)
(ISO15744)
) † Pressure (L ) ‡ Power (L
w p
91.1
91.1
91.1
91.1
91.1
91.1
* K = Vibration measurement Uncertainty
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
11. Grease - through fitting
Vibration (m/s²)
(ISO28927)
) Level *K
w
102.1 8.7 2.7
102.1 8.7 2.7
102.1 8.7 2.7
102.1 8.7 2.7
102.1 8.7 2.7
102.1 8.7 2.7
47103767_ed9