Lcd/Keypad Module Function Calls; Lcd/Keypad Module Initialization - Rabbit RabbitCore RCM3309 User Manual

Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 20-101-1194 - MODULE RABBITCORE RCM3309 ROHS
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
C.8 LCD/Keypad Module Function Calls
When mounted on the Prototyping Board, the LCD/keypad module uses the external I/O
bus on the Rabbit 3000 chip. Remember to add the line
#define PORTA_AUX_IO
to the beginning of any programs using the auxiliary I/O bus.
C.8.1 LCD/Keypad Module Initialization
The function used to initialize the LCD/keypad module can be found in the Dynamic C
LIB
\DISPLAYS\LCD122KEY7.LIB
void dispInit();
DESCRIPTION
Initializes the LCD/keypad module. The keypad is set up using keypadDef() or
keyConfig() after this function call.
RETURN VALUE
None.
User's Manual
library.
dispInit
113