Comparing The Rcm3309/Rcm3319 And Rcm3305/Rcm3315 - Rabbit RabbitCore RCM3309 User Manual

C-programmable core module with serial flash mass storage and ethernet
Hide thumbs Also See for RabbitCore RCM3309:
Table of Contents

Advertisement

Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 20-101-1194 - MODULE RABBITCORE RCM3309 ROHS
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

1.2 Comparing the RCM3309/RCM3319 and RCM3305/RCM3315

Temperature Specifications
RCM3305/RCM3315 RabbitCore modules that support the -40°C to +70°C temperature
range. RCM3305/RCM3315 RabbitCore modules manufactured after May, 2008, are
specified to operate at 0°C to +70°C. The RCM3309/RCM3319, rated for -40°C to
+85°C, are offered to customers requiring a larger temperature range after May, 2008.
Maximum Current
required by the RCM3309/RCM3319.
— The
LEDs
SPEED
the RCM3305/RCM3315 and the RCM3309/RCM3319, the
been combined to one LED on the RCM3309/RCM3319, and the RCM3309/RCM3319
has an
/
LED instead of the
FDX
COL
LED on the RCM3305/RCM3315 blinks when data are being written to or read from
the serial flash. The
FDX/COL
Ethernet connection is in full-duplex mode (steady on) or that a half-duplex connection
is experiencing collisions (blinks).
NOTE: The change in LED indicators means that there is no indication on the
RCM3309/RCM3319 when data are being written to or read from the serial flash.
Ethernet chip.
A different Ethernet controller chip is used on the RCM3309/RCM3319.
The Ethernet chip is able to detect automatically whether a crossover cable or a straight-
through cable is being used in a particular setup, and will configure the signals on the
Ethernet jack interface.
Dynamic C
— As long as no low-level FAT file system calls were used in your applica-
tion developed for the RCM3305/RCM3315, you may run that application on the
RCM3309/RCM3319 after you recompile it using Dynamic C v. 9.60.
4
— We can no longer obtain certain components for the
— The RCM3305/RCM3315 draws 250 mA vs. the 325 mA
and user (
/
)LED locations have been swapped between
USR
BSY
LED on the RCM3305/RCM3315. The
SF
LED on the RCM3309/RCM3319 indicates whether the
LNK
/
ACT
LEDs have
SF
RabbitCore RCM3309/RCM3319

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RabbitCore RCM3309 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Rabbitcore rcm3319

Table of Contents