Rcm3309/Rcm3319 Features - Rabbit RabbitCore RCM3309 User Manual

C-programmable core module with serial flash mass storage and ethernet
Hide thumbs Also See for RabbitCore RCM3309:
Table of Contents

Advertisement

Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 20-101-1194 - MODULE RABBITCORE RCM3309 ROHS
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

1.1 RCM3309/RCM3319 Features

• Small size: 1.85" x 2.73" x 0.86"
(47 mm x 69 mm x 22 mm)
• Microprocessor: Rabbit 3000 running at 44.2 MHz
• 10/100Base-T auto MDI/MDIX Ethernet port chooses Ethernet interface automatically
based on whether a crossover cable or a straight-through cable is used in a particular
setup
• 49 parallel 5 V tolerant I/O lines: 43 configurable for I/O, 3 fixed inputs, 3 fixed outputs
• Three additional digital inputs, two additional digital outputs
• External reset
• Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
parallel I/O lines), plus I/O read/write
• Ten 8-bit timers (six cascadable) and one 10-bit timer with two match registers
• 512K flash memory, 512K program execution SRAM, 512K data SRAM
• 4MB/8MB mass-storage flash-memory options, which are required to run the Dynamic C
FAT file system module and the featured remote application update.
• Real-time clock
• Watchdog supervisor
• Provision for customer-supplied backup battery via connections on header J4
• 10-bit free-running PWM counter and four pulse-width registers
• Two-channel Input Capture (shared with parallel I/O ports) can be used to time input
signals from various port pins
• Two-channel Quadrature Decoder accepts inputs from external incremental encoder
modules
• Five or six 3.3 V CMOS-compatible serial ports with a maximum asynchronous baud
rate of 5.525 Mbps. Three ports are configurable as a clocked serial port (SPI), and two
ports are configurable as SDLC/HDLC serial ports (shared with parallel I/O ports).
• Supports 1.15 Mbps IrDA transceiver
The RCM3900/RCM3910 and RCM3365/RCM3375 RabbitCore modules are similar to
the RCM3305/RCM3315 and RCM3309/RCM3319, but they use fixed NAND and/or
removable media for their mass-storage memories instead of the fixed serial flash options
of the RCM3305/RCM3315 and the RCM3309/RCM3319.
2
RabbitCore RCM3309/RCM3319

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rabbitcore rcm3319

Table of Contents