Table of Contents
Advertisement
6.3
Mounting the digital display
The digital display is delivered already mounted when it is ordered with the instrument.
In cases of damage, accessories can be ordered.
•
Push up the latch with the arrow until the grip of the retaining ring on the
electronic insert is heard to click.
•
Loosen the retainer ring and lift off carefully to prevent the display cable
from breaking.
•
Remove the plug of the display from the electronic insert.
To loosen the holder from the electronic insert
push latch with arrow upwards.
Fig. 6.1: left:
Loosening the retaining ring
right:
Removing the display
•
Insert the plug of the display in the jack in the electronic insert provided for
this purpose and clip in
•
Insert the pin on the retaining ring into the hole in the electronic insert
provided for this purpose
•
Firmly press down the retaining ring with the display onto the electronic
insert. The stop makes an audible click.
Damping
Zero
1
2
3
on
off
+
–
Fig. 6.2: Mounting the display
Lifting off the display and removing the display
.
ó
.
➁
➀
Display
Damping
Zero
Span
1
2
3
on
off
Display
+
–
Barcon LHC/PPC (HART)
Maintenance and repair
Removing the display
Mounting the display
33
Advertisement
Table of Contents
