Table of Contents
Advertisement
Barcon LHC/PPC (HART)
Installation
Mounting the PPC-M10
14
•
Measurement in liquids:
Mount on the shut-off valve below the tapping point or at the same height
Fig.2.3:
Mounting on a shut-off valve for measuring liquids
The PPC-M10 with metal sensor is available in the following versions:
•
with flush-mounted diaphragm or
•
with adapter and internal diaphragm.
The adapter can be screwed on or welded in.
A gasket is enclosed according to the material used and version.
G½ external with O-ring
Viton seal
G½ external
G ½
Ø 26.4
Hastelloy spring
Viton seal
Fig.2.4:
PPC-M10 with flush-mounted diaphragm
G ½
Ø 26.4
Screwed plug
DIN 3852 -E-G½
Teflon
G ½
Ø 26.4
Teflon-backup
PTFE seal
Welded nozzle
21.3
19.4
50
O-ring 14 x 1.78
Viton or NBR
Threaded hole
DIN 3852-X-G½
27
21
Advertisement
Table of Contents
