Safety/Sicherheit; General Information; Summaries; Description - Comtech EF Data XTRT-400C Operation And Installation Manual

Table of Contents

Safety/Sicherheit

MNC-0200-001

EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject

to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,

whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.

This chapter identifies the safety requirements to be applied when

performing any of the procedures specified in this manual. It is the

responsibility of the user to follow all applicable safety regulations

when using this manual. This chapter contains safety summaries

consisting of general safety and health precautions.

Equipment of this nature has inherent hazards. Only trained

Operators and Service Personnel should work on or operate this

equipment.

The general safety requirements identified in this chapter are

applicable to anyone doing the procedures included in this manual.

Warnings, cautions, and notes are used in these procedures to alert

the user to special conditions regarding safety or correct performance

of a particular step or steps. They are placed immediately prior to the

procedural step to which they apply, or immediately prior to the

procedure itself if they apply to the entire procedure.

Warnings and cautions are constructed in three parts or sentences.

First, the hazard is stated; second, the correct action to be performed

is stated; and, third, the result of failing to comply with the action is

stated. Notes, however, can be in any form necessary to convey the

needed information. The definitions below show how warnings,

cautions, and notes are used.

3 of 14

Safety/Sicherheit

Revision E

Table of Contents

Table of Contents