Comtech EF Data XTRT-400C Operation And Installation Manual page 139

Command Byte: '%'
Function: Sets the Amplifier internal clock. The clock is referenced when time stamping events as they are
recorded.
Parameter: "YYYY/MM/DD, hh:mm"
Example: 2002/02/08, 13:01
YYYY = 2002
MM = 02
DD = 08
hh = 13
mm = 01
Note: The hours are in 24 hour format.
Command Byte: '~'
Function: Resets the processor.
Command Byte: ':'
Function: Enables/Disables Heater Standby mode.
Parameters:
'0' - Disable Heater Standby.
'1' - Enable Heater Standby.
Note: The "XTRT Series Amplifiers" power up with heater standby enabled.
MNC-0500-038
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
Amplifier Communication and Protocol, XTRT, Touchscreen TWTA
Time and Date
Reset Processor
Heater Standby
26 of 28 Revision 2