Table of Contents
Advertisement
Available languages
Available languages
9. Cleaning
9.1 Cleaning
-
Clean using a soft moistened cloth which will not scratch the display.
-
Always turn the power off before cleaning.
10. Troubleshooting
10.1 Reseting the weather station
You can reset the weather station to factory settings by pressing RESET on the weather
station. N.B. After resetting the USB-transmitter must be re-synchronised to the weather
station. Refer to section 5.4.
10.2 Troubleshooting
Problem
The weather station
does not come on.
The display does not
show all information.
The weather forecast
does not seem accurate.
No outdoor temperature
is displayed.
Possible solution
Check that the adaptor is connected properly to both the
weather station and wall socket.
1) Make sure that your computer is on and connected to
the Internet.
2) Check that the USB transmitter is properly connected.
3) Press and hold –/C/F for approx. 2 seconds to restart
weather data reception.
4) Re-synchronise the USB transmitter to the weather
staion. Refer to section 5.4.
The wrong city has been selected for forecasts.
Select a closer city. Refer to section 5.3.
1) The outdoor sensor is out of range. Move the sensor
closer to the weather station.
2) The batteries in the sensor are weak.
Change the batteries.
3) The outdoor sensor is not synchronised with the
weather station. See section 4.4.
18
Advertisement
Table of Contents
