Care And Maintenance; Troubleshooting - Clas Ohlson IW003 Quick Start Manual

Set time and date
1. Press and hold SET / ALM SET for ca.
2 seconds. The year flashes and the symbol "Yr"
appears. Press + and – to insert year.
2. Press SET/ALM SET: the month flashes on the
display. Press + and – to insert month.
3. Press SET/ALM SET: the computer network
flashes. Press + and – to set date.
4. Press SET/ALM SET: "00" flashes. Press +
and – to set time or to set time zone (see
section World time).
• "00" = Local time.
• "01" = +1 h from local time.
• "-01" = -1 h from local time.
5. Press SET/ALM SET: "24hr" flashes. Press + or –
to select 12- or 24-hour clock display.
6. Press SET/ALM SET: time flashes. Press + or –
to set time.
7. Press SET/ALM SET: minute flashes. Press + or
– to set minutes.
8. Press SET/ALM SET: again or wait ca 10
seconds to return to normal conditions.
Using your weather station
Using alarm
Set alarm time
The world station has dual alarm time, A1 and A2,
which can be set separately.
1. Press SET/ALM SET once. The alarm time and
"A1" appear on the display (to set alarm time 2,
press SET/ALM SET again until "A2" appears
and then continue to step 2).
2. Press and hold SET/ALM for ca. 2 seconds until
the time flashes. Press + or – to set the hour.
3. Press SET/ALM SET: the minute display flashes.
Press + or – to set minute.
4. Press SET/ALM SET again: the symbol for days
flashes. Press + or – to select the days the alarm
should sound.
• MON, TUE, WED, THU, FRI, SAT, SUN –
Alarm every day
• MON, TUE, WED, THU, FRI – Alarm only
Monday to Friday.
• SAT, SUN – Alarm only Saturday and Sunday.
5. Press SET/ALM SET again or wait ca 10
seconds to return normal situation.
Activate the alarm
Press ALM ON-OFF one or more times to activate
or shut off Alarm 1 and Alarm 2. A symbol appears
when one or the other alarm is activated.
GREAT BRITAIN • for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
1
= Alarm 1
2
= Alarm 2
Shutting off alarm/Repeated waking
1. When the alarm time comes the alarm sounds at
the same time as the alarm symbol flashes.
2. Press the top edge of the weather station
(SNOOZE/LIGHT) to shut off the alarm temporarily
(repeated waking). The alarm symbol continues to
flash and the alarm sounds again after 5 minutes.
3. To shut off the alarm permanently press ALM
ON-OFF once. The alarm symbol stops flashing
and begins to glow steadily; the alarm is now set
to sound again the next day.
Using the backlight
The display's backlighting is turned on by pressing
the top edge of the weather station. The lighting
goes off automatically after a few seconds.
Changing the temperature unit (°C/°F)
Press – (°C/°F) to change the temperature unit.
World time
1. If a world time (secondary time) is given it can be
displayed by pressing and holding MEM/DUAL
TIME for ca 2 seconds. The secondary time
appears and the symbol DUAL TIME lights up.
2. Press MEM/DUAL TIME again and hold to return to
local time. The symbol DUAL TIME is extinguished.
Weather forecasting and trend
The weather station can sense variations in atmos-
pheric pressure and hence is able to forecast the
weather 12-24 hours ahead within a radius of
30-50 km from the receiver.
Sun Shifting Overcast
cloudiness
Rain clouds Thunder Frost warning
showers
Trend
When appears the atmospheric pressure is
rising and the weather is expected to improve.
When appears the atmospheric pressure is
falling and the weather is expected to take a turn
for the worse.
When appears variations in atmospheric
pressure are stable.
Atmospheric pressure history
The curve shows the atmospheric pressure trend
over the past 12 hours.
Notes:
• When the weather station has been newly installed
you should disregard its weather forecasts for the
first 12-24 hours as it needs some time in a new
location before it can give reliable forecasts.
• Absolute precision cannot be guaranteed. The
weather forecasting function has a reliability of
75% because it has been designed for use in
many different types of environment.
• If the weather station is moved to a location
with a notably different height above sea level
compared to its original location, remove the
batteries and re-insert them after ca. 20 seconds.
Doing this prevents the weather station from
sensing differences in the atmospheric pressure
and thereby giving a wrong forecast. Disregard
weather forecasts the first 24 hours after changing
batteries. By doing this the weather station is not
tricked into sensing difference in pressure and
thus give an incorrect forecast.
Temperature and humidity trend
The trend arrows appear to the right of the tempera-
ture and humidity readings.
Appears when the most recent temperature or
humidity measurements are 1 °C or 5 % higher than
the preceding temperature or humidity readings.
Appears when the most recent temperature or
humidity measurements are 1 °C or 5 % lower than
the preceding temperature or humidity readings.
Appears when the most recent temperature or
humidity measurements are within +/- 1 °C or +/- 5 %
of the preceding temperature or humidity readings.
Reading max. and min. temperatures
1. Press MEM/DUAL TIME to read the highest
temperature, humidity and pressure readings.
"MAX" appears in the display.
2. Press MEM/DUAL TIME again to read the lowest
temperature, humidity and pressure readings.
"MIN" appears in the display.
Resetting max. and min.
When the max. - and min. temperature appear press
and hold MEM/DUAL TIME to reset the highest and
lowest temperature readings.

Care and maintenance

Wipe off the device with a dry rag. Never use
solvents or abrasive cleaning agents.

Troubleshooting

The display • Press once the RESET button at
is blank. the back of the receiver.
• Check and replace the
receiver batteries.
The tempe- • Check that the correct channel
rature and is set on the receiver. Press +/
humidity CHANNEL one or more times
from the out- to select the channel.
door sensors • Check and replace the
do not ap- sensor batteries.
pear on the • Try moving the sensor and
display. receiver closer to one another.
The receiver and the sensor must be
synchronised anew.
1. Press +/CHANNEL on the
receiver to select the desired
channel for the sensor.
2. Press and hold +/CHANNEL on
the receiver to start the search.
3. Next press RESET on the sensor.
4. When the sensor's temperature
appears on the display
synchronisation has succeeded.
Temperature, • Press once the RESET on the
humidity or back of the receiver.
pressure is • Check that the sensor or receiver
incorrect. are not exposed to external heat
sources or cooling units.
Recycling
Make sure you comply with local regulations when
discarding the device. If you are not sure what to do,
contact your local authorities.