H3C S6800 Series Mce Command Reference page 29

Parameters
vpn-instance vpn-instance-name: Specifies the name of a VPN instance, a case-sensitive string of 1 to 31
characters.
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters.
ipv6-address: Specifies a peer by its IPv6 address.
log-info: Displays log information.
verbose: Displays detailed information.
Usage guidelines
If no parameter is specified, the command displays brief information about all BGP IPv6 peers in the
specified VPN instance.
Examples
# Display brief information about all BGP IPv6 peers in the VPN instance vpn1.
<Sysname> display bgp peer ipv6 vpn-instance vpn1
BGP local router ID: 2.2.2.2
Local AS number: 100
Total number of peers: 1
Peer
3::3
Table 7 Command output
Field
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about BGP IPv6 peer 1::2 in the VPN instance vpn1.
<Sysname> display bgp peer ipv6 vpn-instance vpn1 verbose
Peer: 1::2
Type: EBGP link
BGP version 4, remote router ID 0.0.0.0
BGP current state: Connect
BGP current event: CRTimerExpired
BGP last state: Connect
Received: Total 0 messages, Update messages 0
AS MsgRcvd MsgSent
200 24
Description
IPv6 address of the peer.
AS number of the peer.
Number of messages received.
Number of messages sent.
Number of messages to be sent.
Number of prefixes received.
Lasting time of the current BGP session state.
Current state of the BGP session between the local device and the peer.
Local: 1::3
Peers in established state: 1
OutQ PrefRcv
29 0 1
22
Up/Down State
00:18:47 Established