Vpn-Instance-Capability Simple - H3C S6800 Series Mce Command Reference

Syntax
vpn-id
undo vpn-id
Default
No VPN ID is configured for a VPN instance.
Views
VPN instance view
Predefined user roles
network-admin
Parameters
vpn-id: Specifies a VPN ID for the VPN instance, in the form of OUI:Index. Both OUI and Index are hex
numbers. The OUI is in the range of 0 to FFFFFF, and the index is in the range of 0 to FFFFFFFF.
Usage guidelines
The VPN ID uniquely identifies the VPN instance. Different VPN instances must have different VPN IDs.
The VPN ID cannot be 0:0.
Examples
# Configure VPN ID 20:1 for the VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] vpn-id 20:1
Related commands
display ip vpn-instance

vpn-instance-capability simple

Use vpn-instance-capability simple to disable OSPF routing loop detection for a VPN instance.
Use undo vpn-instance-capability to restore the default.
Syntax
vpn-instance-capability simple
undo vpn-instance-capability
Default
OSPF routing loop detection is enabled for a VPN instance.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
In an MCE network, you must disable OSPF routing loop detection for a VPN instance on the MCE.
Otherwise, the MCE does not receive OSPF routes from the PE.
16