Domain-Id - H3C S6800 Series Mce Command Reference

<Sysname> display ip vpn-instance
Total VPN-Instances configured : 1
VPN-Instance Name
abc
Table 5 Command output
Field
VPN-Instance Name
RD
Create Time
# Display detailed information about VPN instance vpn1.
<Sysname> display ip vpn-instance instance-name vpn1
VPN-Instance Name and Index : vpn1, 2
Route Distinguisher : 100:1
VPN ID : 1:1
Description : vpn1
Interfaces : Vlan-interface2
Address-family IPv4:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Maximum Routes Limit : 5000
Address-family IPv6:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Maximum Routes Limit : 5000

domain-id

Use domain-id to configure an OSPF domain ID.
Use undo domain-id to restore the default.
Syntax
domain-id domain-id [ secondary ]
undo domain-id [ domain-id ]
Default
The OSPF domain ID is 0.
RD
1:1
Description
Name of the VPN instance.
RD of the VPN instance.
Time when the VPN instance was created.
7
Create time
2011/05/18 10:48:17