H3C S6800 Series Mce Command Reference page 12

Field
State
# Display detailed information about BGP peers for VPN instance vpn1.
<Sysname> display bgp peer ipv4 vpn-instance vpn1 verbose
Peer: 10.1.1.1
Type: EBGP link
BGP version 4, remote router ID 0.0.0.0
BGP current state: Connect
BGP current event: CRTimerExpired
BGP last state: Connect
Received: Total 0 messages, Update messages 0
Sent: Total 0 messages, Update messages 0
Maximum allowed prefix number: 12345
Threshold: 23%
Minimum time between advertisements is 30 seconds
Optional capabilities:
Multi-protocol extended capability has been enabled
Route refresh capability has been enabled
Peer preferred value: 0
Table 3 Command output
Field
Peer
Local
Type
remote router ID
BGP current state
BGP current event
BGP last state
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between
advertisements
Optional capabilities
Description
Current state of the BGP session between the local device and the peer.
Local: 10.1.1.2
Description
IP address of the peer.
Local router ID.
BGP connection type between the local device and the peer:
•
IBGP link—IBGP connection.
•
EBGP link—EBGP connection.
Router ID of the peer.
Current state of the BGP session between the local device and the peer.
Current event of the BGP session between the local device and the peer.
Previous state of the BGP session.
Total numbers of received messages and updates.
Total numbers of sent messages and updates.
Maximum number of routes allowed to learn from the peer.
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.
Minimum route advertisement interval in seconds.
Optional capabilities supported by the local end.
5