Ext-Community-Type - H3C S6800 Series Mce Command Reference

Parameters
route-policy: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
You can specify an export routing policy to filter advertised routes or modify their route attributes for the
VPN instance.
An export routing policy specified in VPN instance view applies to both IPv4 VPN and IPv6 VPN.
An export routing policy specified in IPv4 VPN view or IPv6 VPN view applies to only IPv4 VPN or IPv6
VPN.
IPv4/IPv6 VPN prefers the export routing policy specified in IPv4/IPv6 VPN view over the one specified
in VPN instance view.
Examples
# Apply export routing policy poly-1 for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] export route-policy poly-1
# Apply export routing policy poly-2 for IPv4 VPN vpn2.
<Sysname> system-view
[Sysname] ip vpn-instance vpn2
[Sysname-vpn-instance-vpn2] address-family ipv4
[Sysname-vpn-ipv4-vpn2] export route-policy poly-2
# Apply export routing policy poly-3 for IPv6 VPN vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] address-family ipv6
[Sysname-vpn-ipv6-vpn3] export route-policy poly-3
Related commands
import route-policy
•
route-policy (Layer 3—IP Routing Configuration Guide)
•

ext-community-type

Use ext-community-type to configure the type code of an OSPF extended community attribute.
Use undo ext-community-type to restore the default.
Syntax
ext-community-type { domain-id type-code1 | router-id type-code2 | route-type type-code3 }
undo ext-community-type { domain-id | router-id | route-type }
Default
The type codes for domain ID, router ID, and route type are 0x0005, 0x0107, and 0x0306.
Views
OSPF view
9