Advertisement
MAINTENANCE
4. If the level is less (if there is no oil flow), top-up with 4T
oil, till the oil just starts to flow out from the oil level
hole.
5. Wipe out the oil traces with a clean cloth to prevent dust
accumulation.
6. Replace the fibre washer while reassembling the oil
level bolt.
CAUTION
If the vehicle is driven with less engine and transmission oil, the
engine components will be severely damaged.
Check the oil level as per the schedule to avoid costly damage. Do
not fill excess oil may cause oil leak. Always use
BRAKES
Front brake
1. Measure the free play of front brake at lever end as
shown in the figure. The distance measured should be
10 ~ 15 mm.
2. If the measured free play is more than the limit, adjust
the nut provided at the front wheel end to obtain
correct play.
3. Turn the adjuster nut in clockwise direction for reducing
free play or in anti-clockwise direction for increasing
free play.
40
4T
oil only.
10 ~ 15 mm
Hide quick links:
Advertisement
