Advertisement
MAINTENANCE
A
C
B
Tyre rotation direction
While reassembling the tyre after removing from the wheel
rim or while assembling a new tyre ensure that the arrow
mark front (B) and rear (C) provided on the tyre facing the
direction of wheel rotation.
Tyre puncture
Your scooter is fitted with a tubeless tyre on both front and
rear wheel. Incase of any puncture / tyre damage, it is
advised to visit the nearest tyre manufacturer Dealer or the
tyre repair shops who knows the repairing method of
tubeless tyre.
It is not necessary to remove the tyre from wheel rim always
to attend a puncture. Even though, if there is need of tyre
removal, it is strongly recommended to use a tyre removal /
fitment machine.
If at all, tyre levers needs to be used, the levers should be
free from sharp edges. Care should be taken not to damage
the tyres and rims.
WARNING
The tyre inflation pressure in cold condition and the tyre tread
condition are extremely important for the performance and safety
of the rider. Check tyres frequently for inflation pressure as well as
the wear pattern on it.
Use of a tyre other than the standard may cause instability.
CAUTION
The side walls of the tubeless tyre which in contact with the wheel
rim are only seals the air inside the wheel assembly. Hence care
should be taken not to damage the side walls of the tyres during
removal / reassembly.
FRONT WHEEL REMOVAL
1. Remove the axle nut (1) along with the washer.
2. Pull out the axle (2) along with washer and take out a
spacer from the right side of the wheel.
43
Hide quick links:
Advertisement
