Download Print this page

TVS JUPITER 2015 Manual page 28

Advertisement

RIDING YOUR TVS JUPITER
STARTING THE ENGINE
Ensure availability of fuel in the fuel tank. Insert the control
key into the ignition switch cum steering lock and turn it to
the 'ON' position.
Apply any one of the brakes and press the
electric starter switch to start electrically or kick start the
engine.
When the engine is cold
Pull the choke knob to fully and start the engine using
r
kick starter with no opening / very less opening of
throttle.
Once the engine is started and running stable, release
r
the choke by pushing choke knob to its original
position and ride the vehicle (when the engine is worm
/ hot do not use choke).
SETTING THE VEHICLE IN MOTION
1. Twist the throttle grip towards you and simultaneously
release the brake lever gently and smoothly. The vehicle
will start moving forward.
2. As the vehicle picks up speed, increase the throttle
slowly.
28
WARNING
Do not run the engine in indoors where little or no ventilation
available. Exhaust gas is extremely poisonous.
CAUTION
Do not raise the throttle rapidly so the vehicle will move forward
suddenly and lead to loss of control.
Do not keep the engine in idling rpm for long and do not open
excessive throttle when engine is idling and the vehicle is parked, it
leads to overheating of the engine and damage to internal
components.
STOPPING AND PARKING
1. Close the throttle completely and apply both the brakes
simultaneously.
2. Turn the ignition 'OFF'.
3. Park the vehicle on a firm, flat surface.
4. Lock the steering and take out the control key. Finally
close the safety key shutter lock.
WARNING
Reduce speed to a safe limit before turning / cornering. It is not
advisable to apply brakes while turning / cornering.

Hide quick links:

Advertisement

loading