Advertisement
KNOW YOUR TVS JUPITER
To assist you in performing certain aspects of periodic
maintenance and emergency repairs, a tool kit is supplied
along with the vehicle and it is located below the seat base.
To access the tool kit, open the seat assembly by inserting
the control key into seat lock and rotating it in clockwise and
lift the seat assembly. The tool kit consists one number each
of the following. Ensure the contents of tool kit.
1.
16x17 mm box spanner
2.
10x12 mm spanner
3.
Combination screw driver bit
4.
Screw driver handle
5.
Tommy bar
6.
Ring spanner
7.
Tool bag
CAUTION
It is recommended to use the tool kit in case of any emergency only.
It is always advisable to take your vehicle to TVS Motor Company
Authorised Distributor or Dealer / Authorised Service Centres.
UTILITY BOX
Utility box is located below the seat. Lift the seat by
unlocking the seat lock as explained earlier, to access the
utility box. A separate cover (A) is provided inside the
24
utility box. Remove this cover to access the carburettor for
servicing purpose.
WARNING
Operating the TVS JUPITER overloaded will hamper riding stability
and may lead to loss of control. Hence, it is advisable to carry the
recommended amount of load only.
CAUTION
Utility box can be used to carry a load of 10 kg maximum. Do not
carry perishable items inside the utility box. It is not fully sealed. Do
not allow / spray water to get inside the utility box. Take care not to
spill petrol or oil into the utility box. Do not keep heat-sensitive items
inside as it may get hot on long rides. Do not keep valuable items
inside the utility box when leaving the vehicle unattended.
A
Hide quick links:
Advertisement
