Fishtrack - Eagle 128 Installation And Operation Instructions Manual

Fish I.D. is most handy when you're in another part of the boat or
performing some task that prevents you from watching the sonar
screen. Then, you can turn on Fish I.D. and the audible
When that lunker swims under your boat, you'll hear it!
Fish I.D. can also be useful when you want to screen out some of the
sonar detail gathered by your unit. For example, it can help cut through
the clutter of suspended bubbles caused by wave action or boat wakes.
To turn Fish I.D. off, press
DOWN ARROW
the above steps, but press

FISHTRACK™

The FishTrack feature shows the depth of a fish symbol when it
appears on the display. To turn it on, press
appears. Press
off, repeat the above steps, but press
want to turn off FishTrack depths but leave Fish I.D. on, press
to select
ARROW
in order to use the FishTrack feature.
Fish ID menu and symbol with FishTrack on. The fish is 44 feet deep.
MENU
to select , then press
O
FF
UP ARROW
to select
UP ARROW
, then press
O
N
until the
F
ISH
. To turn it back on, repeat
PWR
to select
MENU
, then press
T O
RACK N
DOWN ARROW
.) Remember, Fish I.D. must be on
PWR
43
FISH ALARM
menu appears. Press
ID
.
O
N
until the
F
PWR
to select
Fish I.D. symbols
showing FishTrack
depth indicator
.
menu
ID
ISH
. To turn it
. (If you
O
FF
DOWN