Fishtrack - Eagle FishEasy 240 Portable Installation And Operation Instructions Manual

out of reading the screen. Remember: Fish I.D. is one of the many tools
we provide so you can analyze your sonar returns for maximum fish
finding information. This and other features can help you successfully
"see" beneath the boat under varied water and fishing conditions. So,
practice with the unit in both the Fish I.D. mode and without to become
more familiar with the feature. The default for Fish I.D. is off.
Fish I.D. is most handy when you're in another part of the boat or per-
forming some task that prevents you from watching the sonar screen.
Then, you can turn on Fish I.D. and the audible fish alarm. When that
lunker swims under your boat, you'll hear it!
Fish I.D. can also be useful when you want to screen out some of the so-
nar detail gathered by your unit. For example, it can help cut through
the clutter of suspended bubbles caused by wave action or boat wakes.
To turn Fish I.D. on, press until the menu appears. Press
MENU F ID
ISH
to select , then press . To turn it back off, repeat the
UP ARROW O PWR
N
above steps, but press to select .
DOWN ARROW O
FF

Fishtrack™

The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. To turn it on, press until the menu
MENU F ID
ISH
appears. Press to select , then press . To turn it
UP ARROW T O PWR
RACK N
off, repeat the above steps, but press to select . (If you
DOWN ARROW O
FF
want to turn off FishTrack depths but leave Fish I.D. on, press
DOWN
to select , then press .) Remember, Fish I.D. must be on
ARROW O PWR
N
in order to use the FishTrack feature.
57