Table of Contents
Advertisement
Power/transducer cable
Cuda 128 and 168 quick release mounting bracket. Slots in the base
allow routing the cable from beneath the mount.
Attach the unit to the bracket by first connecting the power/transducer
cable. Then, hold the sonar unit vertically and slide it onto the bracket
from above. (The back of the unit should be touching the front of the
bracket as you lower it into position.) As you push down, the unit will
lock into place with a distinct click.
To adjust the viewing angle, pinch the ratchets with one hand, then tilt
the unit with your other hand. Release the ratchets and the unit locks
into the new position. To dismount the unit for storage, press the
ratchets and lift the unit off the bracket.
Ratchet
Screw hole
24
Rear
(away from viewer)
Cable slot
Hide quick links:
Advertisement
Table of Contents
