To Turn The Fish I.d. Feature On; Fishtrack; To Turn On Fishtrack - Eagle FISHMARK 640C Installation And Operation Instructions Manual

To turn the Fish I.D. feature on:

1. From the Sonar Page, press
2. Press → to
To turn off Fish I.D., repeat the instructions in step 2.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.

To turn on FishTrack:

(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press
2. Press → to
To turn off FishTrack, repeat the instructions in step 1. Turning off
FishTrack in this manner will not turn off Fish I.D. symbols.
Fish Symbols with
FishTrack depths
Sonar Page showing both the Fish I.D. symbol and FishTrack depth fea-
|
F S ENT
ISH YMBOLS
|
F D ENT
ISH EPTHS
|↓ to
MENU
| |
EXIT EXIT
|↓ to
MENU
| | .
EXIT EXIT
tures turned on.
67
S F
ONAR EATURES
.
S F
ONAR EATURES
| .
ENT
| .
ENT