Table of Contents
Advertisement
Chapter 1 Overview
1-2 IP-421 PRINT CONTROLLER
Interface: Parallel port
Based on Centronics (IEEE 1284)/Amphenol male 36pin connector
Network interface: (option)
KN-303 Network card
Network: Ethernet (100BaseTX/10BaseT)
Protocols: IPX/SPX (NetWare),
Compliant OS:
Windows 95/98
Windows NT4.0/2000
Macintosh
Unix
Printer Language:
PCL
PostScript3 (option)
Printer drivers:
Windows 95/98 printer driver
Windows NT4.0/2000 printer driver
Host computer: A Windows based computer
Macintosh
Unix
Finisher: FS-107
paper tray unit: DB-209,DB-409
Size: 240 mm(W) x 160 mm(H) x 37 mm(D)
Weight: Approx. 1.1 kg
Power source: 5 V, 2 A or less (supplied from copier)
Operating conditions:temperature: 10-30˚C,
Restrictive Conditions:
• In the Printer mode, the EKC (Electric Key Counter) of the Konica
7020 series is not available.
• Although the Weekly Timer function of the Konica 7020 series is
available in the Printer mode, the power is not turned Off until
the data output is finished when print data remains in the E-RDH.
Notice: Specifications are subject to change for improvements without no-
tice.
TCP/IP (LPD/LPR, peer-to-peer)
AppleTalk (EtherTalk)
humidity: 20-80%RH (condensation not allowed)
Advertisement
Table of Contents
Troubleshooting
