Lanner NCA-1516 User Manual page 82

NCA-1516 User Manual
Login as "root."
1.
Have all network interfaces disconnected.
2.
It requires five steps to rename system's network interface in Linux.
Scan all network-related interfaces in the system.
1.
Filter the network interfaces. Please only preserve the interface that you want to rename.
2.
Check interfaces' status.
3.
Rename.
4.
Save the new name to the configuration file.
5.
There are some parameters that can be modified in the config file. (E.g. Character '#' in the config file means
comment).
⚫ Filter: The network interface that user wants to rename.
⚫
UdevAddress: The path of udev rule files.
⚫ UdevFilename: Udev rule file name.
⚫ IfcfgAddress: The path of ifcfg files.
⚫
SaveStep: If set to 0, the program will skip the step of saving.
⚫ AutoNaming: The program will auto rename the network interface if user sets AutoNaming in the
config file. The format is "AutoNaming oldName:newName." For example, if set "AutoNaming
eth0:lanner0", the program will rename eth0 to lanner0 automatically.
Filter eth
UdevAddress /etc/udev/rules.d
UdevFilename 10-lanner_net.rule
IfcfgAddress /etc/sysconfig/network-scrips
AutoSave 0
AutoNaming eth0:lanner0
AutoNaming eth1:lanner1
AutoNaming eth2:eth10
82