QDI PlatiniX P8/333 Series Manual page 30

BIOS Description BIOS Description BIOS Description BIOS Description BIOS Description
Video
Set this field to the type of video display card installed in your system.
EGA/ VGA
CGA 40
CGA 80
MONO
Halt On
This category determines whether or not the computer will stop if an error is detected
during powering up.
No errors
All errors
All, But
28
Keyboard
All, But
Diskette
All, But
Disk/Key
Memory
This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS.
Base Memory The POST of the BIOS will determine the amount of base
Extended
Memory
Total Memory
Enhanced Graphics Adapter / Video Graphic Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters.
Color Graphic Adapter, powering up in 40 column mode.
Color Graphic Adapter, powering up in 80 column mode.
Monochrome adapter, including high resolution monochrome
adapters.
The system boot will not stop for any errors detected.
Whenever the BIOS detects a non-fatal error, the system will
stop and you will be prompted.
The system boot will not stop for a keyboard error; but it will
stop for all other errors.
The system boot will not stop for a disk error; but it will stop for
all other errors.
The system boot will not stop for a keyboard or disk error, but it
will stop for all other errors.
(or conventional) memory installed in the system.
The BIOS determines how much extended memory is
presented
during the POST.
Total memory of the system.
QDI QDI QDI
QDI QDI