QDI PlatiniX P8/333 Series Manual page 71

4. Click Finish to restart the system.
Attaching speakers
To perform multichannel audio operation, connect multiple speakers to the system. You should
connect the same number of speakers as the audio channels you will select in the software
utility.
2-Channel Analog Audio Output
The audio connectors on the back panel already provide 2-channel analog audio output
function. The back panel's audio connectors can be transformed to 4/6-channel analog audio
connectors automatically when you select correct setting in the software utility. For informa-
tion about the setting, refer to Selecting 4- or 6-Channel Setting later in the section.
Make sure all speakers are connected to Line Out connectors. Diverse connector configura-
tions for 2-, 4- and 6-channel using back panel connectors are described below:
Select this
option
Click here
PlatiniX 8/333 PlatiniX 8/333 PlatiniX 8/333 PlatiniX 8/333 PlatiniX 8/333
69