QDI PlatiniX P8/333 Series Manual page 51

The following attachment is Backup and Recovery Function table:
Backup Backup content
Partition Table Partition Table
System Partition System Partition+Partition Table
Whole Disk All Partitions+Partition Table
CMOS Setup CMOS Setup
Menu Language and Hotkey Selection
Please press "DEL" key to enter CMOS setup during the POST(Power On Self Test), then
user can see [RecoveryEasyII Setting] items of the "QDI Innovation features" menu, in
which the language on RecoveryEasyII interface and hotkey could be selected .
1. Menu language Select
We provide two menu language for user to select, English is the default.
2 . Hot key for Backup
There are 12 options, including NULL and F2~F12. Key F11 is default. If NULL is
selected, Backup interface can not be used with pressing hotkey. If you select one key
of the rest 11options, you can enter Backup interface by pressing the hotkey you setup
during POST.
Restore content
Partition Table
System Partition, PartitionTable
System Partition, PartitionTable,
Whole Disk
CMOS Setup
figure-1 QDI Innovation Features
49
PlatiniX 8/333 PlatiniX 8/333 PlatiniX 8/333 PlatiniX 8/333 PlatiniX 8/333