Upgrading Host Adapters (Ha-Ps2, Ha-Sun, Ha-Usb, Ha-Rs) - NTI PRIMUX Series Firmware Upgrade Procedure

NTI PRIMUX FIRMWARE UPGRADE
The User Station is now in bootloader mode. This is indicated by "88"' flashing on the front panel of the User Station.
The monitor connected to the "Monitor" port on the User Station will also go blank.
For User Stations running firmware version 2.0 or later:
From the User Station displaying the OSD USER/ADMIN LOGIN splash, login as the administrator. Using the
attached keyboard enter
• NAME:
<root>
• PASSWORD: <nti>
Note: If the administrator has changed the password, only the new password will permit access to the User
Station.
Note: If you have just upgraded an User Station from 1.9 to 2.0, and you have not changed the password
from the default password "NTI" (uppercase letters), then the login name to login as the administrator will
be "root" (all lowercase), and the password will be "NTI" (all uppercase). The password does not change
when firmware is upgraded.
Starting from the OSD command menu,
•
Press <A> for Administration Menu,
•
Press <F> for Firmware Configuration.
•
Press <B> for Go To Bootloader.
•
You will be prompted "Are you sure? (Y/N)"

UPGRADING HOST ADAPTERS (HA-PS2, HA-SUN, HA-USB, HA-RS)

The following steps must be performed in the order indicated. Do not cycle power to any device until the process is
complete.
There is only one file that needs to be uploaded per type of Host Adapter (HA).
HA Type
PS2
USB
SUN
SERIAL
for example PRIMUX_HA_PS2_1_6.b01
Take note of the type of Host Adapter being upgraded, PS2, SUN, USB, or SERIAL. An upgrade file for a specific
type of Host Adapter can only be applied to a Host Adapter of the same type (PS2 file for HA-PS2, SUN file for HA-
SUN, USB file for HA-USB, and SER (RS) file for HA-RS).
Note: The HA-RS Host Adapter is only compatible with User Stations running firmware version 2.0 or later.
Press <Y> to proceed.
Filename
PRIMUX_HA_PS2_<revision>.b01
PRIMUX_HA_USB_<revision>.b01
PRIMUX_HA_SUN_<revision>.b01
PRIMUX_HA_RS_<revision>.b01
5