Machine's Description; Transport Of The Machine - YILMAZ KD 402 Manual

2.3.9 Unplug first, before conducting and maintenance works.
2.3.10 Ensure that any keys or adjustment tools have been removed before operating the machine..
2.3.11 If you are required to operate the machine outside, use only appropriate extension cables.
2.3.12 Repairs should be carried out by qualified technicians only. Otherwise, accidents may occur.
2.3.13 Before starting a new operation, check the appropriate function of protective devices and tools, ensure that they
work properly. All conditions have to be fulfilled in order to ensure proper operation of your machine. Damaged
protective parts and equipment have to be replaced or repaired properly (by the manufacturer or dealer).
2.3.14 Don't use machines with improper functioning buttons and switches
2.3.15 Don't keep flammable, combustive liquids and materials next to the machine and electric connections.

3. MACHINE'S DESCRIPTION

Circular saw cutting machine designed for double-sided cutting of PVC and aluminum profiles to the desired measure in
straight or angled cutting operations.

The saw blade movement is hydro-pneumatically, and it is possible to adjust the movement speed of the saw blade
precisely according to the material to be cut.

The clamps operate pneumatically, operating at low pressure and with both hands occupied for safety reasons.

The left cutting head is fixed, while the right head is movable manually.

The right head is equipped with a pneumatic braking system. For the operator's safety, the machine does not work with
the brake key OPEN.

Measurements can be taken precisely with the digital read-out system.

Cutting at fixed angles of 15º-22.5º-30º-45º-90º, and at any intermediate angle through a fixing handle.

Machine has been designed in accordance with the CE Safety Directives.
STANDARD ACCESSORIES
User manual
Service wrench (6 mm)
Service wrench (8 mm)
Service wrench (17 mm)
400 mm Saw blade
Profile support apparatus

4. TRANSPORT OF THE MACHINE

4.1. The transport should be done by qualified personnel only.
4.2. The machine should be transported by lifting with proper equipment (not touching the ground during the transport).
4.3. Unless customer requests the contrary, the machine will be delivered with wooden packaging.
4.4. Movable parts on the machine should be fixed before carrying out the transport.
4.5. The machine size and weight measurements, given the technical specification sheet.
4.6. On the machine, the are places to carry the machine with suitable lifting eye bolts. During transportation of the
machine, Yilmaz supplied eye bolts can be used to lift the machine.with an appropriate lifting device. Please pay
attention not to give any damage to the machine during lifting.
4.7. In order to get more stability when hanging the machine in case of move it, hang it from bottom insofar. Move the
machine without shaking it in slow movements. Be sure to take care of persons in dangerous places.
OPTIONAL ACCESSORIES
Cooling system
22