Machine's Description; Transport Of The Machine - YILMAZ ACK 420 Manual

3. MACHINE'S DESCRIPTION

Single Head Upcut Mitre Saw designed for straight and angle cutting of PVC and Aluminium profiles

Hydro-pneumatic saw blade feed with variable speed control to suit different profiles & materials

Two hand control system application is available in terms of employee safety.

Positive locating pin lock at 15°; 22, 5°; 30°; 45°; 90° , intermediate angles set with a table lock

Moveable back fences to maximize cut capacity

Saw complies with CE Safety Directives
STANDART AKSESUARLAR
420 mm Diamond-Tipped Circular Saw
Air Gun
Conveyor (MKN 300)
User's manual

4. TRANSPORT OF THE MACHINE

4.1. The transport should be done by qualified personnel only.
4.2. The machine should be transported by lifting with proper equipment (not touching the ground during the transport).
4.3. Unless customer requests the contrary, the machine will be delivered with wooden packaging.
4.4. Movable parts on the machine should be fixed before carrying out the transport.
4.5. The machine size and weight measurements, given the technical specification sheet.
OPSİYONEL AKSESUARLAR
Cooling system (ACK 420 S)
Additional 420 mm saw blade
Horizon pneumatic clamps
34