Belshaw Brothers Donut Robot Mark II Operator's Manual

Hide thumbs Also See for Donut Robot Mark II:

Operator's manual (57 pages)

Operator's manual (71 pages)

Table of Contents

Quick Links

The #1 Source for Donut and Bakery Equipment

O P E R A T O R ' S M A N U A L

T E C H N I C A L S U P P L E M E N T

P A R T S A N D E L E C T R I C A L D I A G R A M S

ITEM NUMBERS

 22650

Mark V, 208-240V, 1ø, Plain

 22651

Mark V, 208-240V, 1ø

 22652

Mark V, 208-240V, 1ø, Star

 22653

Mark V GP, 208-240V, 1ø, Mini

SERIAL NUMBER

Item Number / Serial Number are listed on a data tag attached to the equipment.

This manual should only be used with the Item Number(s) shown above.

SUPPORT

Donut Robot ®

Mark V / Mark V GP

 22657

Mark V, 208-220V, 3ø, Star

 22658

Mark V, 208-220V, 3ø, Plain

 22659

Mark V GP, 208-220V, 3ø, Mini

USA/Canada 1-800-BELSHAW

International (+1) 206-322-5474

www.belshaw.com

 22657-1

Mark V, 230-240V, 3ø, Star

 22658-1

Mark V, 230-240V, 3ø, Plain

 22659-1

Mark V GP, 230-240V, 3ø, Mini

Email service@belshaw.com

Web www.belshaw.com

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the Donut Robot Mark II and is the answer not in the manual?

Questions and answers

Summary of Contents for Belshaw Brothers Donut Robot Mark II

Page 1 The #1 Source for Donut and Bakery Equipment www.belshaw.com O P E R A T O R ' S M A N U A L T E C H N I C A L S U P P L E M E N T P A R T S A N D E L E C T R I C A L D I A G R A M S Donut Robot ®...
Page 3 Donut Robot  Mark II, Mark II GP Mark V & Mark V GP Operator’s Manual Belshaw Adamatic Bakery Group 814 44 Street Northwest, Suite 103 Auburn, WA 98001 USA Phone: (206) 322-5474 • E-mail: service@belshaw.com www.belshaw-adamatic.com...
Page 4 Belshaw Adamatic Bakery Group 814 44 Street Northwest, Suite 103 Auburn, WA 98001 USA Phone: (206) 322-5474 • Fax: (206) 322-5425 E-mail: service@belshaw.com • http://www.belshaw-adamatic.com Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 5: Table Of Contents
Shortening Reserve Tank Donut-Making Helps Tips on Making Quality Cake Donuts Calculating Correct Water Temperature Ratios of Plunger Sizes to Donut Weights Temperature Conversion Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 6: Introduction
• Do not overfill the kettle with shortening. If shortening overflows the Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 7: Major Components Of The Donut Robot ® Mark Ii And Mark
Mark V is 50% longer. All components apply to Mark II and Mark V, both standard and GP models. Figure 1.1. Donut Robot Mark II. (components apply also to Donut Robot Mark V)   Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 8: Operation
( temperature is reached). LIGHT will turn on). 4. Turn on the FRYER HEAT switch (the temperature controller will turn on). Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 9: Inserting Shortening
The heat of the fryer will melt the See your EZ Melt manual. shortening in the tank. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 10: Making Cake Donuts
Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 11: Making Yeast-Raised Donuts
8. Turn the FRY TIME dial to adjust the fry time to the desired speed. FRYER CONVEYOR switch to 9. Set AUTO. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 12: Cleaning
• When washing parts by hand, wash each part separately; do not put any other utensil or dish in the sink with the part being washed. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 13: Cleaning The Conveyor And The Kettle
Allow the Using the temperature controller, heat the water to cool to 100°F/38°C. solution to 200°F/93°C. Turn on the Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 14 Shortening to spatter or overflow the fryer and may result in fire, injury, or death. Figure 3 Removing the Turner Cam Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 15 Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 16: Maintenance
Figure 6 Lubricating the Connecting Rod. Weekly Apply a few drops of Food Grade mineral oil to the swing column where it contacts the swing column bracket. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 17: Accessories
Release the plunger from the depositor. 3. Unscrew and lift off the hopper assembly. 4. Lift off the depositor and swing column. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 18 6. Continue putting proofing cloths on the Feed Table. CAUTION To avoid damaging the machine, never use force to assemble or operate the Feed Table. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 19 Donut Robot so donuts will fall into it. 2. Connect the Roto Cooler power cord to the 120 V outlet on back of the Donut Robot’s heater head. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 20: Filter Flo Siphon
Place a five-gallon metal container under the filter. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 21 Tighten the thumb screw. i. Restart the siphon, as explained in step 1. j. Continue watching the container and repeat the above procedure as needed. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 22: Shortening Reserve Tank
WARNING Be careful if you put hot shortening into the tank. Hot shortening can cause serious burns. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 23: Donut-Making Helps
The donuts may also become dense inside. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V OM MN-1012EN...
Page 24: Calculating Correct Water Temperature
Donut Weight per 23.9 182.2 Dozen 26.7 185.0 1” 5-8 oz/142-227 g 162.8 187.8 1 9/16” 14-21 oz/397-595 g 165.6 190.6 168.3 193.3 Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V OM...
Page 25 Donut Robot  Mark II, Mark II GP Mark V & Mark V GP Technical Supplement Belshaw Adamatic Bakery Group 814 44 Street Northwest, Suite 103 Auburn, WA 98001 USA Phone: (206) 322-5474 • E-mail: service@belshaw.com www.belshaw-adamatic.com...
Page 26 Troubleshooting Mark II and Mark V FT-42 Feed Table Temperature Controller Changing Parameters on the Electronic Temperature Controller Diagrams and Parts Lists Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 27: About The Technical Supplement
While very effort is made to inform you of how to install and maintain the Donut Robot safely,  Belshaw disclaims any liability for the use of the information contained herein. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 28: Installation
Mark V is 50% longer. All components apply to Mark II and Mark V, both standard and GP models. Figure 1.1. Above: Donut Robot Mark II. (components apply also to Donut Robot Mark V) Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com...
Page 29: Unpacking The Fryer
(See Figure 1-2.) Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 30 7 and 8 and proceed to step 9. 7. Insert the swing column into the swing column-mounting bracket. Make sure the Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 31: Assembling The Depositor
The depositor should run continuously. Turn off the depositor. Figure 1-6. Mounting the Hopper. 3. Install the plunger as follows: Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 32: Adjusting The Hopper
Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 33: Leveling And Securing The Fryer
6. To avoid dropping the machine or getting shortening on the floor wipe excess shortening off of the fryer and the conveyor. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 34: Maintenance
Figure 2-1. Lubricating the Connecting Rod. Weekly 1. Apply a few drops of food grade lubricating oil to the swing column where it contacts the Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 35: Taking Care Of The Plunger, Hopper, And Cylinder
• Do not force the machine if it becomes jammed. To avoid damaging the plunger, disassemble the machine and remove any obstructions. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 36: Troubleshooting
• The model name of the machine. • The serial number of the machine. • The voltage, phase, and cycle of the machine. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 37: Mark Ii And Mark V
The tip of the cylinder is nicked. Replace the hopper. The size-selection dial is not tightened. Tighten the thumb nut. The dough is overmixed. Review the mixing procedure. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 38 Lubricate the upper and lower legs of the bracket swing column and the swing column mounting with SAE 30 machine oil. bracket. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 39 Clear away the cause of the interference. dog in the depositor. The brake spring in the depositor is weak or Replace the spring. broken. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 40 To avoid being burned, electrocuted, or otherwise injured, turn off the machine, allow the shortening to cool, and disconnect the machine from the power source. Replace the thermostat. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 41 Align the motor shaft with the conveyor shaft. When they are aligned, tighten the mounting spacers. Replace the cover. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 42 Bend the arm back into position or replace the microswitch. The wires on the depositor microswitch are Make the correct connections. reversed. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 43 Also, make sure that the pins are securely seated in the pin housing. The Feed Table / Cake Donuts switch is Replace the switch. defective. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 44 The contactor for the transistor is defective. Replace the contactor. The connections to the contactor are bad. Rewire the connections to the contactor. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 45 Clear the obstruction. The couplings are not engaged. Engage the couplings. The conveyor drive coupling is slipping. Tighten the two set screws. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com Donut Robot Mark II / Mark V TS MN-1013EN...
Page 46: Ft-42 Feed Table
The fuse on the Feed Table is blown. Replace the fuse. The fuse for the Donut Robot’s conveyor is Replace the fuse. blown. Belshaw Adamatic Bakery Group • www.belshaw-adamatic.com • 206-322-5474 •service@belshaw.com MN-1012EN Donut Robot Mark II / Mark V TS...
Page 47 To avoid electric shock or other injury, before doing the following, unplug the machine. The cam in the power head is loose. Tighten the cam set screw. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Donut Robot Mark II TS MN-1013EN...
Page 48 The brake is defective. Repair or replace the brake. The cam in the power head is loose. Tighten the cam set screw. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1013EN Donut Robot Mark II TS...
Page 49: Temperature Controller
Changing Parameters on the Electronic Temperature Controller To change parameters on the temperature controller, see the Service Bulletin SB-0446 on the following pages. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Donut Robot Mark II TS MN-1013EN...
Page 50 3. Press the O key to return to operator screen Operator set points Set Point 0.0 375.0/190.0 °F/°C al-1 Alarm Value 1 10.0/5.0 °F/°C Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1013EN Donut Robot Mark II TS...
Page 51 Advanced level parameters a1lt Alarm 1 Latch Enabled 1:"PV/SP/No display" spd1 PV/SP No. 1 Display Selection pVdp PV Decimal Point Display OFF [ Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 Donut Robot Mark II TS MN-1013EN...
Page 52 6. Press the O key for more than 1 second return to operator screen Please do not hesitate to contact Belshaw Adamatic Bakery Group for additional assistance at (206) 322-5474, (800) 578-2547or e-mail at service@belshaw.com. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1013EN Donut Robot Mark II TS...
Page 53 Parts Diagrams For Mark V, Mark V GP The mechanical and electrical diagrams for Donut Robot® Mark V models specified for North America are indicated in the table below. ABOUT ITEM NUMBERS: All machines are identified by an Item Number. The Item Number is located on a data tag attached to the back of the control panel.
Page 54 DIAGRAM: MKV-1001-3.75 USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ALL ITEM NUMBERS MARK V – PART DESCRIPTION SHOWS 3.75 MARK V GP – PART DESCRIPTION SHOWS 3.00 DIAGRAMS PAGE ©2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved...
Page 57 CUTTERHEAD (DEPOSITOR) DIAGRAM: MK-1044TAB USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ALL ITEM NUMBERS © 2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved DIAGRAMS PAGE...
Page 59 DIAGRAM: MKVI-1120TAB USE THIS DIAGRAM FOR MODEL: Mark V, Mark V GP ALL ITEM NUMBERS CONVEYOR DRIVE MOTOR ASSEMBLY (MARK V & MARK V GP) MARK V MARK V GP © 2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved DIAGRAMS PAGE...
Page 60 DIAGRAM: MKV-1611TAB USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22650, 22651, 22652, 22653 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL HEATERHEAD COMPONENTS (PAGES 9-11) DIAGRAMS PAGE ©2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved...
Page 61 DIAGRAM: MKV-1611TAB SEE PAGE 8 FOR PARTS LIST USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22650, 22651, 22652, 22653 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL SEE PAGE 8 FOR PARTS LIST ©...
Page 62 DIAGRAM: MKV-1611TAB USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP SEE PAGE 8 FOR PARTS LIST ITEM NUMBER: 22650, 22651, 22652, 22653 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL SEE PAGE 8 FOR PARTS LIST DIAGRAMS PAGE ©2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA.
Page 63 DIAGRAM: MKV-1611TAB USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP SEE PAGE 8 FOR PARTS LIST ITEM NUMBER: 22650, 22651, 22652, 22653 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL SEE PAGE 8 FOR PARTS LIST ©...
Page 64 DIAGRAM: MKV-1631TAB USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22657, 22657-1, 22658, 22658-1, 22659, 22659-1 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL HEATERHEAD COMPONENTS (PAGES 13-15) DIAGRAMS PAGE ©2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved...
Page 65 DIAGRAM: MKV-1631TAB SEE PAGE 12 FOR PARTS LIST USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22657, 22657-1, 22658, 22658-1, 22659, 22659-1 SEE DATA TAG ON CONTROL PANEL SEE PAGE 12 FOR PARTS LIST © 2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved DIAGRAMS PAGE...
Page 66 DIAGRAM: MKV-1631TAB SEE PAGE 12 FOR PARTS LIST USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22657, 22657-1, 22658, 22658-1, 22659, 22659-1 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL SEE PAGE 12 FOR PARTS LIST DIAGRAMS PAGE ©2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA.
Page 67 DIAGRAM: MKV-1631TAB SEE PAGE 12 FOR PARTS LIST USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22657, 22657-1, 22658, 22658-1, 22659, 22659-1 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL SEE PAGE 12 FOR PARTS LIST ©...
Page 69 DIAGRAM: MK-1731_R0_CV USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBERS: 22650, 22652, 22653 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL VOLTS 208/220/230/240 HERTZ 50-60 PHASE 6.9/7.6/8.3/9.1 AMPS 33/34.8/36.2/37.7 © 2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved DIAGRAMS PAGE...
Page 71 DIAGRAM: MK-1736_R0_CV USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ITEM NUMBER: 22657, 22657-1, 22658, 22658-1, 22659, 22659-1 TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL VOLTS 208/220/230/240 HERTZ 50-60 PHASE 6.9/7.6/8.3/9.0 AMPS 19.2/20.3/21.2/22.1 ©...
Page 72 DIAGRAM: MKCD-4000 USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ALL ITEM NUMBERS TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL CONVEYOR DRIVE DIAGRAMS PAGE ©2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved...
Page 73 DIAGRAM: MKCD-4000 USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ALL ITEM NUMBERS TO IDENTIFY MODEL AND ITEM NUMBER, SEE DATA TAG ON CONTROL PANEL CUTTERHEAD (DEPOSITOR) © 2019 Belshaw Adamatic Bakery Group, Auburn, WA 98001 USA. All Rights Reserved DIAGRAMS PAGE...
Page 74 DIAGRAM: MK-2005 USE THIS DIAGRAM ONLY FOR MODEL: Mark V, Mark V GP ALL ITEM NUMBERS HOPPERS AND PLUNGERS 1-9/16” 1-9/16” 1-13/16” 1-9/16” 1-9/16” 1-13/16” DOUBLE MINI PLUNGER STAR PLUNGER PLUNGER PLUNGER 1-9/16” diameter (40mm) 1-9/16” diameter (40mm) 1-13/16” diameter (40mm) 1”...
Page 75 Belshaw Adamatic Bakery Group Limited Warranty / Return Policy Subject to the terms and limitations set forth in this limited warranty (“Limited Warranty”), Belshaw Adamatic Bakery Group (also referred to as “the Manufacturer”) warrants to the original purchaser (“Purchaser”) of Manufacturer’s equipment and parts (“Products”), Belshaw Adamatic Bakery Group’s manufacture and assembly of Products to be free from defects in workmanship and material which would result in product failure under normal use and service.
Page 76 Warranty Claims In case of warranty claims relating to your Product, you must follow the instructions below. Report Claims to Your Authorized Distributor or Dealer or to Belshaw Adamatic Bakery Group As soon as you discover a problem, contact the Distributor or Dealer from whom you purchased the Product or Belshaw Adamatic Bakery Group.
Page 77 The #1 Source for Donut and Bakery Equipment www.belshaw.com BELSHAW ADAMATIC BAKERY GROUP 814 44th Street NW, Suite 103 Auburn, WA 98001 USA 1-800-578-2547 (USA/Canada) (+1) 253-886-5340 (Worldwide) service@belshaw.com an Ali Group Company The Spirit of Excellence...

This manual is also suitable for:

Donut robot mark ii gp Donut robot mark v Donut robot mark v gp 22650 22651 22652 ... Show all

Belshaw Brothers Donut Robot Mark II Operator's Manual

Section 1

Introduction

Operation

Cleaning

Maintenance

Accessories

Donut-Making Helps

Section 2

1 About the Technical Supplement

2 Installation

3 Maintenance

4 Troubleshooting

5 Temperature Controller

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Belshaw Brothers Donut Robot Mark II

Summary of Contents for Belshaw Brothers Donut Robot Mark II

This manual is also suitable for:

Table of Contents