Summary of Contents for Belshaw Brothers Heat & Ice H&I-2
Page 1
Heat & Ice H&I-2, H&I-4, H&I-6, IGT Operator’s Manual Technical Supplement Belshaw Bros., Inc. 814 44th Street NW, Suite 103 Auburn, WA 98001 USA Tel: (206) 322-5474 Fax: (206) 322-5425 Toll Free (US): 1-800-578-2547 E-mail: service@belshaw.com www.belshaw.com...
Page 2
Contents Operation Initial setup Cleaning Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 H&I All Models OM MN-1731EN...
Page 3
Preface The H&I Heat and Ice is designed for icing cause people to slip or fall, resulting in donuts and a variety of baking products quickly serious injury or loss of life. and easily. • To prevent unintentional startup and It is meant to be used on a flat surface.
Page 4
Operation Wash H&I with warm water and a mild detergent. 4. Sanitize H&I 5. Install one empty icing bowl. 6. Fill kettle with hot water until the empty icing bowl is floating ½ in. off the cover. 7. Install the remaining bowls, lids and thermometer to the kettle 8.
Page 5
Cleaning For your safety, observe the following warnings 3. Drain water from kettle, using the drain throughout the entire cleaning process. valve on the back of the machine. WARNING IMPORTANT Thoroughly clean and dry the floor if To avoid damage to the wire / frame, use glaze, water, or other materials are spilled.
Page 6
Heat & Ice H&I-2, H&I-4, H&I-6, IGT Technical Supplement Belshaw Bros., Inc. 814 44 Street NW, Suite 103 Auburn, WA 98001 USA Phone: +-1-206-322-5474 • Fax: +-1-206-322-5425 Email: service@belshaw.com • http://www.belshaw.com...
Page 7
Contents Installation Maintenance Troubleshooting Appendix Parts List Drawing Insert Page Insert Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 H&I All Models MN-1731EN...
Page 8
Preface The H&I Heat and Ice is designed for icing get spilled on the floor, mop it up donuts and a variety of baking products quickly immediately. Materials on the floor can and easily. cause people to slip or fall, resulting in serious injury or loss of life.
Page 9
Installation Sanitize H&I 5. Install one empty icing bowl. 6. Fill kettle with hot water until the empty icing bowl is floating ½ in. off the cover. 7. Install the remaining bowls, lids and thermometer to the kettle 8. Plug in H&I NOTE Use hot water to fill the H&I, using cold water can take up to 8 hours to heat up to...
Page 10
Maintenance There is no maintenance required for the H&I-2, H&I-4, or IGT models. Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425 MN-1731EN H&I All Models...
Page 11
Troubleshooting If you have a problem with your H&I that you CAUTION cannot solve, call your dealer or another qualified technician. If you perform repairs yourself or have If your dealer cannot help you, please call them performed by anyone other than a service technician authorized by Belshaw Belshaw Bros.
Need help?
Do you have a question about the Heat & Ice H&I-2 and is the answer not in the manual?
Questions and answers