Operation - Flex L 12-3 100 WET Instruction Manual

L/LE 12-3 100 WET

OPERATION

CONNECTION TO THE POWER
SUPPLY WITH GFCI SWITCH
DANGER
This tool is provided with a Ground
Fault Circuit-Interrupter (GFCI). Never
use the tool without the GFCI installed
and working properly. Before using the
tool TEST the GFCI device.
CAUTION
Make sure switch is OFF and power
circuit voltage is the same as that
shown on the specification plate.
Always check the machine before use:
1. Insert the mains plug into the socket.
The red indicator light must come
on.
2
3
2. Press "TEST" button.
The GFCI switch must switch off and
the indicator light go out.
3. When the "RESET" button is
pressed, the red indicator light must
come on and it must be possible to
switch on the power tool.
DANGER
If the GFCI switch repeatedly switches
off when the machine is switched on or
if the GFCI switch does not trip,
immediately disconnect the machine
from the power supply.
Do not continue using the machine.
Have the GFCI switch replaced by
customer service only.
CONNECTING THE WATER
DANGER
Keep water away from the electric
power tool and from people within the
operating range. Do not switch on
power tools which have not been con-
nected correctly to the water supply.
Regularly check that seals, shut-off
valve and connectors function
correctly.
This tool is designed to be used in a wet
application.
4
1. Attach ½" water hose to standard
self-locking quick coupling.
Never use the tool without water flow.
Instruction manual
11